Leading Film Faced Plywood Manufacturing
Leading Film Faced Plywood Manufacturing
PANDAFOREST Structural LVL Beams E16 is F22 stress grade high strength Structural engineered wood product. it primarily used for structural applications including floor joists, bearers, lintels, verandah beams and roof members.
Designed to quality, PANDAFOREST Structural LVL Beams E16 ideal choice for all types of construction projects, renovation, new buildings, pre-fabricated houses and elements.
PANDAFOREST Structural LVL Beams E16 beams available in long continuous lengths and thicknesses including 35 mm, 45 mm, 63 mm and 75 mm and section depths from 90 mm to 600 mm.And also available in H2S glue-line treatment ‘protected to the core’ for termite protection applicable for areas of Australia south of the Tropic of Capricorn and is cost-effective termite protection with a 25-year guarantee.
PANDAFOREST Structural LVL Beams E16 is certied to conform to AS/NZS 4357 Structural laminated veneer lumber.
| Thickness (mm) | Depth (mm) | |||||||||||||||
| 70 | 90 | 100 | 120 | 130 | 140 | 170 | 190 | 200 | 240 | 290 | 300 | 360 | 400 | 450 | ||
| 27 | ||||||||||||||||
| 35 | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | ||||
| 45 | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | ||||
| 63 | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | ||||
| 65 | ||||||||||||||||
| 75 | ||||||||||||||||
| Length Availability 3.6m, 4.2m, 4.8m, 5.4m, 6.0m, Other lengths are available by special manufacture up to 12m * Available in lengths of 6.0m only | ||||||||||||||||
| Veneer Thickness ：Constant through the product thickness | |||||||||||
| Joints：Scarf and / or butt jointed | |||||||||||
| Moisture Content：8% – 15% (at time of despatch) | |||||||||||
| Dimensional Tolerances：Available on request | |||||||||||
| Straightness：Available on request | |||||||||||
| Density：780 kg/m³ (approximately) | |||||||||||
| Adhesive：Phenolic – AS 2754.1 | |||||||||||
| Bond：A Bond – AS/NZS 2098.2 | |||||||||||
| Joint Group ：JD3 – for nails, bolts and screws | |||||||||||
| Finish：Unsanded faces, sawn edges and arrised edges. | |||||||||||
| Branding：Each piece of PANDAFOREST LVL is branded as least once with the product name for identification and evidence of compliance with manufacturing control standards | |||||||||||
| Storage：Store on level bearers at maximum 1800mm centres well clear of the ground, and cover to keep dry but allow ventilation | |||||||||||
| Source：Plantation timber |
Special dimensions available by request – there may be requirements for minimum quantity per special dimension
We can provide OEM orders according to your requirements and work with you to build your own structural LVL beams brand. Please contact our OEM Service Team.
PANDAforest Fancy veneered blockboard decorative panels is made up from quality natural veneer bonded to premium blockboard.
Learn More
PANDAforest Film Faced Plywood Combi is a high-quality plywood. Core panel is hardwood and poplar mixed combi core. Surface covered with exclusive resin-treated phenolic film that turns into a hard protective layer after hot press. Because of this, the surface is resistant to water, wear, chemicals, fungi and mold.
Learn More
The PANDAforest melamine faced Blockboard is high quality melamine coated Blockboard panel. With Blockboard base board as the core layer and coated with melamine on the face and back.
Learn More
PANDAFOREST Structural LVL Beams E16 is F22 stress grade high strength Structural engineered wood product. it primarily used for structural applications including floor joists, bearers, lintels, verandah beams and roof members.
Learn More
CNFP's had gone through a tedious 10 years of painstaking research-studies and continuous exploration, making PANDAforest rubber wood finger joint board reach the leading manufacturing level. It can be used as the benchmark of the best finger joint plate in the world, both in appearance and stability.
Learn More
PANDAforest HPL MDF Board ( High Pressure Laminates MDF Board ) also known as a fire-resistant MDF board. It is a kind of engineered MDF overlaid on both sides with an stable, consistent, hard wearing HPL layers, can be effective flame retardant.
Learn More