Leading Film Faced Plywood Manufacturing
Leading Film Faced Plywood Manufacturing
PANDAforest Combi OSB is made of mixed combi timber (mostly Poplar and hardwood) . It is a consistent product , Our sheathing gives builders an advantage over other panels. The superior engineering of these panels protects against buckling, cupping, warping and sagging. To speed up installation.
PANDAforest Poplar OSB panels are available in three grade:
OSB-2 products — structural boards used in dry conditions.
OSB-3 products — structural boards used in humid conditions.
OSB-4 products — high-strength structural boards used in humid conditions.
PANDAforest Combi OSB is a solid-panel product of consistent quality with few voids or gaps.
High cost performance and low price.
Smooth surface; no core voids, knots or splits.
Good sound insulation, high stiffness and ability to withstand significant snow and wind loads allow to use.
We have the flexibility to customize specific properties, lengths, widths.
Edge seal helps prevent moisture intrusion and water-related issues that can lead to call backs.
Suitable for uses not permanently exposed to the weather (exposure 1 panel).
Available in 8-ft, 9-ft and 10-ft lengths.
Available in tongue and groove profile for easy installation
Environmentally safe construction material.
High strength and stiffness
Strong and uniform consistency throughout.
Support FSC and PEFC legally harvested resources. and is E1 emissions compliant.
Support OEM/ ODM service.
◎ Wall Sheathing - interior and exterior walls. OSB panels can be used with all types of interior and exterior finishing materials
◎ Roof sheathing- OSB panels as an underlayment for shingles, concrete and metal tiling, slating and other roofing materials.
◎ Subfloor - can be used both as continuous flooring and load bearing joists
◎ Single floor – in light structures OSB panel can be used directly as flooring.
◎ Furniture –frames of upholstered furniture, chairs, cabinet furniture, home built-in furniture (coat closets, shelving units, wall wardrobes)
◎ I-joists – supporting floor and wall structures in timber houses.
◎ SIP panels - Manufacturing consisting of two outer OSB layers and a core polystyrene foam layer.
◎ Stiff basis - for thermal panels
◎ Formwork Plywood - Overlayed OSB panels can be used repeatedly as a concrete formwork.
◎ Plank - Stairs, landings, scaffoldings
◎ Fence - temporary construction site fencing.
◎ Partition wall - partition walls for ships and railcars
◎ Structures for auto vehicles, trailer floorings and truck bodies
◎ Packing - Shipping crates and pallets packing materis.
◎ Deck - shelving units, exhibition stands, furniture shelves, shop counters, table tops, bill boards.
◎ DIY
PANDAforest OSB panels are available in two edge types:
Don't hesitate to contact us for color customization. Contact Us
| Grade | Size | Layer up | Weight (kg/sheet) | Core Materials | Packing Unit (sheets) | ||||||
| OSB3 | 1220x2440x6mm | cross-oriented | 11 | Mixed Combi | 125 or 155 | ||||||
| OSB3 | 1220x2440x9mm | cross-oriented | 16.5 | Mixed Combi | 85 or 100 | ||||||
| OSB3 | 1220x2440x11mm | cross-oriented | 20.5 | Mixed Combi | 65 or 75 | ||||||
| OSB3 | 1220x2440x12mm | cross-oriented | 22 | Mixed Combi | 65 or 75 | ||||||
| OSB3 | 1220x2440x15mm | cross-oriented | 27.5 | Mixed Combi | 45 or 60 | ||||||
| OSB3 | 1220x2440x18mm | cross-oriented | 33 | Mixed Combi | 43 or 50 | ||||||
| OSB3 | 1220x2440x21mm | cross-oriented | 38.5 | Mixed Combi | 37 or 45 | ||||||
| OSB3 | 1220x2440x25mm | cross-oriented | 46 | Mixed Combi | 31 or 37 | ||||||
| OSB3 | 1220x2440x28mm | cross-oriented | 51.5 | Mixed Combi | 27 or 32 |
| FORMALDEHYDE EMISSION：E0 ≤0.03 | |||||||||||
| Layer up：Cross-oriented | |||||||||||
| Moisture Content：8% – 15% (at time of despatch) | |||||||||||
| Dimensional Tolerances：±0.3mm | |||||||||||
| Straightness：±1.5mm | |||||||||||
| Density：580 kg/m³ (approximately) | |||||||||||
| Adhesive：Available MDI, E0 | |||||||||||
| Joint Group：For nails, bolts and screws | |||||||||||
| Finish：Unsanded faces, sanding / T&G / paint edges. | |||||||||||
| Branding：Each pallet of PANDAFOREST OSB is branded as least once with the product name for identification and evidence of compliance with manufacturing control standards | |||||||||||
| Storage：Store on level bearers at maximum 1800mm centres well clear of the ground, and cover to keep dry but allow ventilation | |||||||||||
| Source：Plantation timber |
Apart from the regular standard dimensions of 1220mm x 2440mm, also special thickness lengths are available (thickness form 6mm-28mm, max lengrh 6000). Special dimensions available by request – there may be requirements for minimum quantity per special dimension.
PANDAforest OSB using the latest resin and continuous press technology, we have the flexibility to customize specific properties, lengths, widths, thicknesses, and surface characteristics.
China Forest Products Supply manufactures OSB products serving a range of industrial purposes and requirements. Whatever the need, our industrial team applies industry-leading technology to manufacture OSB panels to exacting specifications.
We can provide OEM orders according to your requirements and work with you to build your own OSB produts brand. Please contact our OEM Service Team.
Manufactured using selected okoume timber according to BS1088-1:2003 standards and Lloyds certified. PANDAforest light marine plywoood is a multi-ply marine plywood that is superior to all standard okoume plywood currently produced.
Learn More
PANDAforest MDF Slotted Board are made from high dense specification raw or melamine MDF board through horizontal T-shaped slot, We supply only top grade slotted MDF to ensuring strong and long-lasting.
Learn More
The PADANforest PP Premium plastic plywood with great durability against scratching and vibrator damage, Their non-absorbent coating and high-grade edge seal mean that no rippling takes place.
Learn More
PANDAforest Tongue and Groove Plywood is a strong, durable and stable structural and non-structural flooring base purposes plywood board, the long edges has machine grooved edges fitted with colour PVC tongues, joined by utilising the tongue and groove method to ensure an easy and tight fit for adjoining plywood panels.
Learn More
PANDAforest Eucalyptus plywood is China’s leading plywood brand. It is made in the China with domestically sourced A grade Eucalyptus. Eucalyptus Plywood stands out for its exceptional hardness and density, making it perfect for flooring and heavy-duty construction. This type of Eucalyptus Plywood is also environmentally friendly, offering a sustainable option without compromising on quality or strength.
Learn More
China Forest Products Supplier Co.,LTD. (CNFP) is a leading manufacturer and supplier of PVC Flooring.
Learn More