Leading Film Faced Plywood Manufacturing
Leading Film Faced Plywood Manufacturing
PANDAforest Tongue and Groove Plywood is a strong, durable and stable structural and non-structural flooring base purposes plywood board, the long edges has machine grooved edges fitted with colour PVC tongues, joined by utilising the tongue and groove method to ensure an easy and tight fit for adjoining plywood panels.
â—Ž Tongue and groove profile for easy installation
â—Ž Faster and easier laying, saving time and cost
â—Ž High cost performance and low price.
â—Ž Preferred because of its warmth and natural markings.
â—Ž Good sound insulation, high stiffness and ability to withstand significant snow and wind loads allow to use.
â—Ž We have the flexibility to customize specific properties, lengths, widths.
â—Ž Edge seal helps prevent moisture intrusion and water-related issues that can lead to call backs.
â—Ž Suitable for uses not permanently exposed to the weather (exposure 1 panel).
â—Ž Environmentally safe construction material.
â—Ž High strength and stiffness
â—Ž Strong and uniform consistency throughout.
â—Ž Support FSC and PEFC legally harvested resources. and is E0 emissions compliant.
â—Ž Support OEM/ ODM service.
â—Ž Subfloor - can be used both as continuous flooring and load bearing joists.
◎ Single floor – in light structures plywood panel can be used directly as flooring.
â—Ž Wall Sheathing - interior and exterior walls. plywood panels can be used with all types of interior and exterior finishing materials
â—Ž Roof sheathing- plywood panels as an underlayment for shingles, concrete and metal tiling, slating and other roofing materials.
◎ Furniture –frames of upholstered furniture, chairs, cabinet furniture, home built-in furniture (coat closets, shelving units, wall wardrobes)
◎ I-joists – supporting floor and wall structures in timber houses.
â—Ž Stiff basis - for thermal panels
â—Ž Formwork Plywood - Overlayed OSB panels can be used repeatedly as a concrete formwork.
â—Ž Plank - Stairs, landings, scaffoldings
â—Ž Fence - temporary construction site fencing.
â—Ž Partition wall - partition walls for ships and railcars
â—Ž Structures for auto vehicles, trailer floorings and truck bodies
â—Ž Packing - Shipping crates and pallets packing materis.
â—Ž Deck - shelving units, exhibition stands, furniture shelves, shop counters, table tops, bill boards.
â—Ž DIY
Type | Size | Layer up | Weight                    (kg/sheet) | Core Materials | Packing Unit (sheets) | ||||||
T&G | 1220x2440x12mm | cross-oriented | 22 | Pine / Hardwood | 65 or 75 | ||||||
T&G | 1220x2440x15mm | cross-oriented | 27.5 | Pine / Hardwood | 45 or 60 | ||||||
T&G | 1220x2440x17mm | cross-oriented | 31 | Pine / Hardwood | 43 or 50 | ||||||
T&G | 1220x2440x18mm | cross-oriented | 33 | Pine / Hardwood | 43 or 50 | ||||||
T&G | 1220x2440x19mm | cross-oriented | 35 | Pine / Hardwood | 38 or45 | ||||||
T&G | 1220x2440x21mm | cross-oriented | 38.5 | Pine / Hardwood | 35 or 40 | ||||||
T&G | 1220x2440x25mm | cross-oriented | 46 | Pine / Hardwood | 31 or 37 | ||||||
T&G | 1220x2440x28mm | cross-oriented | 51.5 | Pine / Hardwood | 27 or 32 |
FORMALDEHYDE EMISSION:E0 ≤0.03 | |||||||||||
Layer up:Cross-oriented | |||||||||||
Moisture Content:8% – 15% (at time of despatch) | |||||||||||
Dimensional Tolerances:±0.3mm | |||||||||||
Straightness:±1.5mm | |||||||||||
Density:620 kg/m³ (approximately) | |||||||||||
Adhesive:E0 | |||||||||||
Joint Group:For nails, bolts and screws | |||||||||||
Finish:sanding / T&G / paint edges. | |||||||||||
Branding:Each pallet of PANDAFOREST T&G plywood is branded as least once with the product name for identification and evidence of compliance with manufacturing control standards | |||||||||||
Storage:Store on level bearers at maximum 1800mm centres well clear of the ground, and cover to keep dry but allow ventilation | |||||||||||
Source:Plantation timber |
Apart from the regular standard dimensions of 1220mm x 2440mm or 1200mm x 2400mm, also special thickness lengths are available (thickness form 6mm-28mm, max lengrh 3600). Special dimensions available by request – there may be requirements for minimum quantity per special dimension.
PANDAforest Tongue & Groove Plywood using the latest resin and continuous press technology, we have the flexibility to customize specific properties, lengths, widths, thicknesses, and surface characteristics.
China Forest Products Supply manufactures Tongue & Groove Plywood products serving a range of industrial purposes and requirements. Whatever the need, our industrial team applies industry-leading technology to manufacture Plywood panels to exacting specifications.
We can provide OEM orders according to your requirements and work with you to build your own Tongue & Groove Plywood produts brand. Please contact our OEM Service Team.